WOCA Diamond Oil Active
WOCA Diamond Oil Active
PRODUCT INFORMATION
WOCA's Premium Penetrating Oil, Diamond Oil Active
Extremely durable wood finish
Plant based
Resistant to liquids such as water, coffee, tea and red wine
Gives the wood a beautiful, breathable surface
Approved for indoor use
Low VOC
Isocyanate free
Low odor
Can be used on all wood species, including Exotic woods.
9 popular colors available.
Diamond Oil Active: Available in 9 colors. 8.5 oz or 2.5 liter can
Note: Diamond Oil has been discontinued and has been replaced with Diamond Oil Active. Same colors, same sheen, improved durability, and workability. We will continue to sell our remaining stock until it is gone.
IMPORTANT: Due to settings and color adjustments within individual computer monitors and hand-held devices, the color on your wood may or may not be achieved as shown in the color swatches.
We encourage you to order a tester and apply it to a piece of your wood for verification.
WOCA Diamond Oil Active is a single-component, extremely durable penetrating oil. Made from plant based materials, providing a low odor, safe wood finishing product that is free of isocyanates.
Diamond Oil Active’s unique hyper cross linking technology will give your wood floor a durable, natural feeling, non-slip surface; leaving floors with a water resistant and easy to clean finish. For all wood species, including Exotics.
Instructions
How to oil with WOCA Diamond Oil Active
The wood must be freshly-sanded to grit 120-150 for the final sanding. Product, room and floor temperature must be between 59-86° F. Ensure good ventilation when applying the oil and when it is drying.
Prep the wood surface with WOCA Intensive Wood Cleaner. This is not optional. Leave the floor to dry for at least 8 hours before applying the oil.
Thoroughly shake the container of Diamond Oil Active, both before and during use. Containers with different batch numbers should be mixed to avoid color mismatch. Apply the oil using the Applicator Pad or a short-bristled paint roller (1/4") in an even coat.
Leave the oil to penetrate for 10-15 min. If the oil soaks quickly into the wood, apply more oil.
Polish the oil into the wood until the floor appears saturated. Use a buffing machine with a white or beige pad.
Remove excess oil with dry, lint-free cotton cloths or pads until the surface no longer appears wet.
For a second coat, apply 3 ounces of Diamond Oil Active per 110 square foot within 6-12 hours of the first coat. The oil should be polished thoroughly, as described in steps 4 and 5 above.
The floor can be used with caution after 24 hours. Full cure is 3-5 days in ideal conditions.
Clean tools with Turpentine.
Please note:
Do not expose the floor to water or clean it for the first 3-5 days while the oil is hardening.
Coverage
Spread Rate: First coat 210-270 square foot per liter. Second coat 600-1,000 square foot per liter
After Care
For regular cleaning, use WOCA Natural Soap or WOCA Oil Refresher. Re-oil the surface with WOCA Maintenance Gel or Diamond Oil Active, as required.
Technical
Product propertiesSolid content> 90 %Density0.95-0.98 g/mlFully hard3-5 days at 68° FColors9 ColorsBinderVegetable oil componentsDilutionTurpentine (does not normally need to be diluted).Drying timeApprox. 24 hours at 68° FApplication toolsPaint Roller, 4 mm
Paint roller handle, 25mm
Telescopic rodDisposalEmpty containers and residues to be disposed of according to local regulations.Shelf life3 yearsPackaging1 L + 2.5 LStorage+ 50-77° F. Keep out of reach of children. Must not be exposed to heat (e.g. sunlight). Store frost-free.